История изменений программы SpeedFan

Изменение в программе SpeedFan 4.52 (29.06.2015):

• added full IPMI support
• added full support for IT IT8771E
• added full support for Intel Sunrise Point (Z170) SMBus
• added full support for STMicro STTS2004
• added full support for NCT6793D
• added full support for Giantec GT34TS04 and GT34TS02
• added support for Atom E3800 SMBus
• added support for Atom C2000 SMBus
• added support for Fintek F71878A/F71868A at non standard addresses
• enabled SMBus on Intel 6 Series / C20x, if needed

Изменение в программе SpeedFan 4.51 (21.02.2015):

• added full support for Fintek F71811U
• added full support for Nuvoton NCT6106D
• added full support for Nuvoton NCT6792D
• added full support for Fintek F71878A/F71868A
• added full support for ITE IT8783F
• added full support for Intel C610/X99 SMBus
• added full support for ITE IT8620E
• added support for Nuvoton NCT6683D
• fixed Fintek F71808A PWM MODE setting
• added PWM 4 ENABLE and PWM 5 ENABLE to advanced options for the ITE IT8620E to enable or disable PWM 4 and 5 writes
• smbus access is disabled for Sapphire PC-AM2RD790
• fixed fan speed readings on the NCT6791D
• SCSI Scan is automatically disabled if iastorA.sys driver is installed - use /DOSCSISCAN to force enable it
• fixed Fintek F71811U PWM TYPE advanced setting
• greatly improved RAM SPD decoding for SDRAM, DDR, DDR2, DDR2 FB-DIMM and DDR3
• improved identification of newer revisions of Microchip MCP9843 and MCP98243
• fixed STTS3000 and STTS2002 temperature reporting
• fixed old IT8705F identification
• events can now be triggered if something happens for, at least, up to 9999 times (it was 99)
• battery charge is now properly updated on the EXOTICS tab
• NCT6791D IO Space accessibility is now tested upon resume from suspend and fixed, if needed
• restored DIMM access on latest Intel chipsets
• added manifest to improve support up to Windows 10
• configuration dialog now always opens at the center of the main window

Изменение в программе SpeedFan 4.50 (19.08.2014):

• Improved external (USB) hard disk detection (some were not properly detected on Windows 8)
• Added a new method to access hard disks connected to 3ware RAID controllers (works on 64 bit systems too)
• Added support for Intel core temperature (Family 06h Model 3Ch)
• Added support for Intel core temperature (Family 06h Model 3Eh)
• Added support for AMD Family 15h temperature
• Added support for AMD Family 16h temperature
• Added support for Intel 8 Series SMBus
• Added support for Intel 8 Series Mobile SMBus
• Added support for Intel 9 Series SMBus
• Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
• Changed the way NCT6779D and NCT6791D read fan speeds
• Added 4 more temperature readings to NCT6779D
• Added Fintek F71808A advanced setting: PWM TYPE 3
• Refined Fintek F71808A description for PWM MODEs
• Added preliminary support for ITE IT8620E temperatures and fan speeds
• Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly

Изменение в программе SpeedFan 4.49:

• fixed a typo that caused ACPI temperatures to be reported wrongly on some Windows 7
• changed the name of the installer to improve compatibility with Windows 8

Изменение в программе SpeedFan 4.47:

• added support for hard disks through CSMI (Intel Matrix RAID and Intel Rapid Storage, for example)
• added support for Intel 7 Series SMBus
• added full support for NCT6779D
• added full support for Fintek F71808A
• fixed temperature reading for Intel Ivy Bridge
• fixed ATK0110 support on several motherboards
• switched to the new HddStatus service (it works on Unix/Linux too now)
• ARECA RAID support is not longer probed on Windows 2K
• limited DELL Studio 1558 support to the PWM alone for system stability
• added support for Seagate FreeAgentDesktop and FreeAgent USB enclosures
• added /NOINTELQST command line parameter
• TDELLSensor now handles resume from suspend

Изменение в программе SpeedFan 4.46 (26-03-2012):

• greatly improved DELL support
• nVidia I2C support works again with driver 275+
• now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
• added support for Intel X79 (Patsburg) SMBus
• added support for ServerWorks HT1000 SMBus
• added SAT support for USB enclosures
• added support for USB enclosures using SunPlus, IoData and Logitech chipsets
• added voltage reading tweaks and configurations for several Intel motherboards
• added full support for Fintek F71858AD
• rewritten Areca RAID support and improved support for Areca SAS controllers
• slightly refactored hard disk USB vendor guessing
• added support for AMD Family 12h (LLano) temperature
• added support for AMD Family 14h (Bobcat) temperature
• ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model)
• added preliminary support for Fujitsu-Siemens Hades

Изменение в программе SpeedFan 4.46 Beta 6 (08-03-2012):

• ATI video card fan control is reset to its original state on SpeedFan exit
• added ServerWorks HT1000 SMBus support
• added support for AMD Llano and Bobcat core temperature reading

Изменение в программе SpeedFan 4.46 Beta 4 (14-02-2012):

• added voltage reading tweaks for several Intel boards
• added configurations for several Intel boards
• added MSI MS-7577 configuration
• added full support for Fintek F71858AD
• improved Areca support for SAS controllers
• refactored USB external drive detection
• added support for USB external enclosures using SunPlus, IoData and Logitech chipsets

Изменение в программе SpeedFan 4.45 (02-11-2011):

• added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
• completely rewritten DELL support
• DELL support is now enabled on a wider range of models
• added full support for ITE IT8772F
• added support for Fintek F71889A
• added full support for SMSC EMC2103-1 and SMSC EMC2103-2
• added support for Fintek F71869AD
• added support for Fintek F71862 at unusual addresses
• preliminary support for SMSC SCH5317
• fixed Nuvoton W83627DHG-P PWM MODE advanced settings
• fixed ASUS ATK0110 readings on several motherboards
• fixed ATK0110 support on some Asus motherboards
• enabled SMBus on Intel ICH9M-E, if needed
• added full AMD Hudson-2 SMBus support
• TACPISonySensor support is now probed on all SONYs
• fixed multiple glitches and bug related to Advanced Fan Control UI
• in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button
• SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention